Forum for discussion of airsoft and airsoft events in Alabama, the Region, and the World
HomeHome  ­CalendarCalendar  ­GalleryGallery  ­FAQFAQ  ­UsergroupsUsergroups  ­RegisterRegister  ­Log inLog in  
Post new topic   Reply to topicShare | 
 

 A&K SR-25

View previous topic View next topic Go down 
AuthorMessage
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: A&K SR-25   Mon Jun 08, 2009 7:23 am

ok ok ok im confused here im horrible with batteries but mine died it was a 8.4v mini NiMH battery will this fit it???
http://www.pyramydair.com/s/a/9_6v_2000mAh_NiMH_Battery_with_Mini_Tamiya_connector/1223
Back to top Go down
Sniperwoosh
Steel City Airsoft Member
Steel City Airsoft Member


Posts: 165
Join date: 2008-10-06

PostSubject: Re: A&K SR-25   Mon Jun 08, 2009 2:06 pm

If it's a full stock yes, but I'd suggest a large type for longer run time.
Back to top Go down
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: Re: A&K SR-25   Mon Jun 08, 2009 3:10 pm

When you say large do you mean conector? or Battery?
Back to top Go down
Sniperwoosh
Steel City Airsoft Member
Steel City Airsoft Member


Posts: 165
Join date: 2008-10-06

PostSubject: Re: A&K SR-25   Tue Jun 09, 2009 4:00 pm

Large battery. Higher mah gives you longer run time, and a little more torque as well.
Back to top Go down
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: Re: A&K SR-25   Tue Jun 09, 2009 4:51 pm

Oke oke oke im confused as hell all the batteries (small and large) look the same even though one is full stock.... confusedalde.

I think im learning.... ( http://www.airsoftgi.com/product_info.php?cPath=27_46&products_id=60 ) <<<< that it says full stock and large conector (my problems cause me $3) i would need a Small to large connector right?????? scratch scratch Sad scratch scratch
Back to top Go down
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: Re: A&K SR-25   Tue Jun 09, 2009 5:36 pm

NO NO NO NO I KNOW THIS WILL WORK!!!!!

http://www.airsoftgi.com/product_info.php?cPath=27_46&products_id=60

http://www.airsoftgi.com/product_info.php?cPath=27_108&products_id=589

(thx for the help sniper)
Back to top Go down
Admin
Admin


Posts: 560
Join date: 2008-09-22

PostSubject: Re: A&K SR-25   Sun Jun 14, 2009 10:13 am

just get the connector changed and use a high mah battery.
Back to top Go down
http://alabamaairsoft.forumotion.net
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: Re: A&K SR-25   Sun Jun 21, 2009 5:07 pm

I have recently done that and was shooting it with a 9.6v 3300 mah and the gun just started screeching..... im confused checked everything and it just keep schreeching im going to take it apart (mabey this is my 2nd aeg sniper and 2nd aeg) and see if anything broke in the gear box. - thanks
Back to top Go down
madrule
Admin


Posts: 255
Join date: 2008-09-24
Age: 38
Location: Alabaster, Alabama

PostSubject: Re: A&K SR-25   Tue Jun 23, 2009 9:56 am

Does it sound like the motor is not completely engaging the gears similar to grinding the gears in a stick shift car?
Back to top Go down
THOR
newbie
newbie


Posts: 12
Join date: 2009-02-17
Age: 29
Location: Maylene

PostSubject: Re: A&K SR-25   Wed Jun 24, 2009 2:12 am

Well me and being stupid with aegs decided to call up my friend and ask him and he just said tighten the screw to the motor then open a little bit, and its all fine now but this gun has brought so many troubles. The wire (black) came out of the conector (no big deal I just got some needle nose pliers and pulled it threw, not really a trouble but it took me FOREVER to find where the upper screw on the stock goes (decided to take off stock to tell HEY LOOKY THERE ITS RIGHT THERE). Thanks anyways
Back to top Go down
Esquire122
Global Moderator


Posts: 152
Join date: 2008-09-22
Age: 49
Location: Auburn, AL

PostSubject: 9.6 volt batteries   Wed Jun 24, 2009 4:00 am

I am absolutely convinced that those who use a 9.6V battery are AEG mechanics-
in-training because you will need that skill when you use it for very long at that
voltage. (Blu, Mateba...very old rant..I know)

ROF is an acronym that either means "Rate of Fire" or, as I like to think, "Relies On Firepower".

Come to think of it, I never hear of uberROF guns at low and mid-cap events. I wonder why?

Respectfully,
Esquire

_________________
Deployed to Alabamastan in the Heart of Deep South Haji land.
Back to top Go down
 

A&K SR-25

View previous topic View next topic Back to top 
Page 1 of 1

Permissions of this forum:You cannot reply to topics in this forum
Alabama Airsoft Forum :: Airsoft Armory :: Snipers/Designated Marksmen-
Post new topic   Reply to topic