I would like to provide a service to fix, tune and upgrade your AEG's mechbox. I know my way around a MB and can help you out if you do not have the time or do not have the expereince required to work on a MB. I can also take the time to show you how to do this yourself.

Upon request, we will meet at a convient location and I will open your mechbox and show you the part or parts that could be replaced to improve the function of your AEG. Then, I will re-assemble your AEG to prevent any accidental loss of parts. After you receive you parts we will meet again and I will install them. If you already have parts on hand I will install them immediatly.

Common tasks in upgrades and repairs:
new spring and spring guide
new gears, bushings/bearings and shimming
new piston and piston head, replacement of... and piston tuning
new cylinder, cylinder head, air nozzle and tappet plate
new trigger contacts, mosfets, battery connectors and soldering
new barrel, hopup units, buckings and nubbings
new motor and rerouting battery contact position

Common tasks in tuning:
precision shimming
shimming for motor height
compression
barrel cleaning, gentel and extreme (cases by case)
gear and cylinder unit lubrication
angle of engagment correction
increase quality and/or ga of wire
seal cylinder head
pre-engagment correction
porting a non-ported piston head
piston weight reduction (swiss cheesing)
piston head o-ring replacement
MB and cylinder cleaning and polishing
tuning compresion unit for exclusive use of heavy BBs
sorbothane cylinder head pad

I would be glad to help anyone but like most of you I am busy. I will let you when would be best for me and my schedule and I will try to accomidate you with yours. If you require help and live in an incovient location you may mail me your AEG and parts but you will have to pay for shipping to and from my location. I will not pay to send your AEG or parts to you. If you do decide to send me your AEG by mail you MUST include your battery and one magazine.

I normally charge $20 an hour but I am willing to take trades. I am currently looking for CO2 and HPA tanks including fill stations. If you are curious, ask, the worst I can say is "no." I do not charge for mistakes if by chance I make one.

You may contact me here by PMing, email at mklawson1@yahoo.com or by calling me at 2059192827. I live in the Shelby County of Birmingham, AL.

mateba