http://www.redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=25512

$307.40 shipped to my door.

Its a true M16a4 replica. FN trades and all (same guys that make the M249s). Colt only makes our troop's M4 carbines now. Far superior internals than you could get else where and even for that price. It'll be here mid next week if you order now. That's competing with CA, G&G, ICS & KWA. If you want cheaper check out TSD and A&K.

u guys have swayed my opinion to an extent and i just want to return to the echo for a sec, i guess the wobble isn't so bad, but is the quality/accuracy/range on it good (as compared to a JG, Dboy, or AGM; NOT compared to a highend). u guys r right fps isn't everything and being able to take a 200ft shot is out of the question (maybe even for my b10-haven't tryed it yet though...) here is the link http://www.airsoftgi.com/product_info.php?cPath=139_24_203&products_id=2355 i rlize my standards were WAY too high, but i guess that is what i get for being a noob lol... how hard is it too install a tb barrel stock to get the best accuracy and to install the tbb do u need any other parts or just the tbb itself?
ps would i be able to get lucky and hit someone at 150ft?

ACM is ACM. E1 rebrands and sometimes re-tunes or uses metal bushings. WOOHOO! I'm not impressed for 50+ jack in price.

DMR bases
http://www.airsoftmegastore.com/CYMA_Full_Metal_Gearbox_M14_Wood_AEG_CM_032_p/cyma-cm032-wood.htm
http://www.airsoftmegastore.com/430_FPS_A_K_Full_Metal_M16_SPR_Mod_0_AEG_Rifle_p/ak-d2.htm

The good thing is that you won' t need to replace the tappet plate.

how about this: i sit back and shutup for a while and u guys all pitch in and tell me which companies are good and which aren't (i have heard that echo1s r actually made by jg, but built to better quality levels).

You'll get two sides, more ACM or buying higher quality guns. If you want to overhaul something because most of the stuff out there doesn't meet your FPS requirements than talking internals is a whole other discussion. In that case, overhauling, you might want an ACM base. I just don't like telling people to buy ACM when they all need a shim job out of box and most of them don't have metal bushings. Most of the remained still suck IMO but in general I don't like everything about any gun. If you have $300, I'd tell you to buy an ACM and upgrade it. If you want help I can do it, I offer an AEG technical service.

You need to decide on what gun you want. M16, M4, M14, SR-25, something.

srry if i didn't clarify i want an m16 WITHIN a $200 budget, i know i know yall will probably say that's not enough for anything good, but that's all i have and i won't rule out anything because of wobble or fps anymore